 |
 |
 |
 |
 |
 |
Open Steel and Aluminum Deck Rollback
Sloan Kwik Load Car Hauler Trailer
Rated to 7,000#
|
Kwik Load Rollback Trailers were designed to solve
trailer and car hauler problems of heavy ramps, tilt
trailer that slam down when loading, hydraulic trailers
with battery or seal problems and ground clearance
problems. This is a "true" rollback design with a 5
degree load angle will load anything with wheels !
Trailers lengths from 16 ft. to 24 ft., steel or
aluminum floor, bumper pull or goose neck, standard
configurations or built to your
specifications. Sloans Kwik Load Rollback Trailers
make auto transport a pleasure ! Owning the
trailer that solves all the problems you have to deal
with, makes buying a Kwik Load Trailer an easy
decision !
|
|
Base model Includes:
One of the lowest load angles of any open trailer
Steel diamond plate loading deck.
7,000 GVWR with silver mod wheels.
6-ply RADIAL tires,
DEXTER Torflex Axle with Easy Lube Hubs.
Four 6,000 lb. swivel tie downs.
78" loading deck with 84" between the removable
fenders.
BOTH fenders Removable
Four wheel electric brakes with manual park brake on
rear axle to lock rear wheels when loading or unloading
Two tool boxes flush with floor
TWO Loading lights built into the floor of the deck
(For strapping a car at night!)
built in battery break away (in tool box)
|
|
Unlike traditional tilt trailers that require more than
one person and that can be difficult to load an
automobile, kwik load trailers are designed to load and
go. The unique, innovative design and engineering allows
for a quick and easy way to load the trailer by using the
towing vehicle to adjust the pitch of the trailer and
securely set it in place to load the vehicle that needs to
hauled and bring the trailer back to it’s in motion
position.
Offering one of the LOWEST LOAD ANGLES
of any trailer on the market, the Kwik Load is the best
choice for really low Cars!
Our custom Roll Back type trailers make traditional
tilt trailers a thing of the past with our patented design
that allows the trailer to be lowered safely like a heavy
duty Roll Back, but by a single operator and a normal
pickup truck!
Don't confuse Kwik-Load trailers with conventional tilt trailers. Boasting unique patented design, Kwik-Load trailers make loading a snap and old-fashioned loading ramps totally obsolete. Intelligent design and engineering make it possible for one person to safely load and unload a Kwik-Load trailer. |
|
In fact, it's as easy as
1-2-3.
|
|
|
1 - Set vehicle to begin loading on trailer, then Back
Up to lower trailer bed.
2 - Drive or winch the vehicle into Load position.
3 - Raise trailer and vehicle by pulling forward,
secure vehicle and trailer and Drive Off.
|
|
|
Click Here to See the
Kwik Load in Action Loading Up a 1969 Road Runner!
|
|
| Click on Any Picture for a Larger, Higher Quality Image | ||
Below is a Stock Model of a 7 x 18 SDX |
||
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Below is a 7 x 18 SDX Shown with Optional Aluminum Wheels, Spare Tire, Spare Tire Carrier and Fairing (Wind Dam) | ||
 |
 |
 |
 |
 |
 |
Copyright© R and P Carriages 2015